United Resin has an extensive and established selection of epoxy resin systems for the electronics industry, several of which are UL approved, meeting potting and encapsulating requirements in a range of conditions. We have both filled and non-filled systems in a variety of viscosities. Our products are used for potting and encapsulating a wide array of electronic assembly components including coils, batteries (including lithium), transformers, circuit boards, magnetic components, marine sonar, noise interference filters and surge protectors. Special systems include Optik-bond, COB and SMT materials used for applications on circuit boards, fiber optics, light emitting diodes and other adhesive applications. All our materials are non-hazardous, REACH/RoHS compliant, and contain no solvents.
We can address your aesthetic considerations with surface finishes in gloss or matte. All our materials are non-hazardous, REACH/RoHS compliant, and contain no solvents.
THE RESINS LISTED BELOW ARE COMBINED WITH THE MOST POPULAR HARDENERS. WE HAVE MANY OTHER HARDENERS, ALLOWING FOR INDIVIDUAL PRODUCT DESIGN.
PLEASE CONTACT US WITH YOUR SPECIFIC NEEDS – WE LOOK FORWARD TO ASSISTING YOU!
1.800.521.4757 | info@unitedresin.com
EL-CAST Electronic Resin
EL-CAST is a filled, medium viscosity, general purpose potting and encapsulating resin. Excellent bonding properties, good air release and high gloss finish. Underwriter Laboratory (UL) approved 94 HB. Ideal for transformers, circuit boards, magnetic components, noise filters, and other applications.
EL-CAST 760 Electronic Resin
EL-CAST 760 is a filled, medium viscosity, high temperature potting and encapsulating resin. Excellent impact resistance, thermal shock resistance, thermal conductivity and high deflection temperature. Ideal for control units, transformers, noise filters, and other applications.
EL-CAST SS Electronic Resin
EL-CAST SS is a highly filled, general purpose potting resin, with high thermal conductivity and high strength. Ideal for all applications requiring a tough protective system with high mechanical and physical properties.
EL-CAST VFR PLUS is our newest innovation where fire safety is a priority. It is a filled, low viscosity, high temperature potting and encapsulating resin, with superior flame resistance, achieves 0 second AfterFlame with certain hardeners, has no flame drip and is easier to mix. Underwriter Laboratory (UL) approved at 94 V-O. Resin has excellent bonding properties, high gloss finish with minimal shrinkage and with 117 hardener is a soft 94 V-O material. Ideal for transformers, alarm systems, filters, magnetic components and surge protectors.
EL-CAST FR Electronic Resin
EL-CAST FR with 440 hardener is a filled, two-component, low-cost, epoxy system with excellent bonding qualities to metals, plastics and ceramics. This system is UL approved at 94 V-O. Its good air release and low viscosity allows the cured resin to have a high gloss finish. Ideal for pulse transformers, magnetic components, noise interference filters, marine sonar devices, and many other potting, casting or encapsulating applications.
EL-CAST 1-F-5 TAB & TAB-SR Electronic Resins
EL-CAST 1-F-5 TAB & TAB-SR are filled, medium viscosity resins that can be used as a one or two component system with excellent thermal conductivity and high temperature resistance. Exhibits good chemical resistance and excellent adhesion at high temperature with a room temperature or a heat cure. Ideal for transformers, filters, coils and all applications where heat cure is possible.
Conductive Epoxy Electronic Resin
Conductive Epoxy is a high strength, heat resistant, silver filled system, which can be cured at ambient or elevated temperatures.
E-CAST W.G. Electronic Resin
E-CAST W.G. is an unfilled, low viscosity, clear potting compound. Excellent adhesion and low viscosity allows for the most intricate applications. Ideal for circuit boards, power supplies, and other applications.
E-CAST F-82 Electronic Resin
E-CAST F-82 is an unfilled, low viscosity resin with high strength adhesion, good air release. Ideal for the most intricate applications, circuit boards, and other applications.
Uni-Lam 1069 Electronic Resin
Uni-Lam 1069 is a filled, medium viscosity, general purpose potting compound. Excellent bonding to metals, plastic and ceramics with high gloss finish. Ideal for all potting applications.
EL-CAST 1-F-5 TAB VO Electronic Resin
EL-CAST 1-F-5 TAB VO is a filled, high viscosity, high temperature one component system. Underwriter Laboratory (UL) approved at 94 V-O. Exhibits low odor, good air release, high gloss finish, and good thermal conductivity. Also used as an encapsulant for “chip-on-board” applications.
E-CAST Flame Bloc Electronic Resin
E-CAST Flame Bloc is an unfilled epoxy system approved UL 94 V-O. This system offers excellent air release and gloss. It has a rigid cure with excellent adhesion and chemical resistance.
E-CAST F-28 Electronic Resin
E-CAST F-28 is an unfilled, medium viscosity, high strength resin with good release, excellent adhesion, clarity and room temperature rigid cure. Ideal for applications where internal viewing is required.
Vibraflex Electronic Resin
Vibraflex is a vibration dampening, flexible epoxy system featuring low exotherm, good thermal shock, low shrinkage, and can be easily cut for repair of components. Specially formulated for adhering board devices and for reducing the impact of shock and vibration on all parts.
E-CAST CCA Electronic Resin
E-CAST CCA is an unfilled, low viscosity resin with superior penetrating properties and high gloss finish.
